FAQ

  • Yes, we can accept various electronic file types and convert them straight to an estimate or import directly into our CamDuct production software.
  • Yes, we can manufacture both stainless steel and Aluminium ductwork and fittings.
  • Yes, we have an online silencer selection program that can do duct run and end noise analysis to identify if a silencer is required. If a silencer is required our program gives you options on DB insertion loss and PA pressure drop to ensure the most effective silencer is selected. A user name and log in is available please contact our staff for further information.
  • Yes, we can make clean room ducting which involves wiping down all internal surfaces and plastic wrapping both the ends of the ductwork to avoid contamination during storage and transport.
  • Yes, we have a 6000 square meter storage yard and 75 storage frames, so we are able to manufacture ductwork before the building site is ready.
  • Yes, this usually involves manufacturing the ducting from stainless steel or Aluminium to avoid zinc whisker contamination and using insulation type to prevent fibre breakout, ductwork is also plastic wrapped both ends to avoid contamination.
  • Yes we have 2 OCE brand AO size plotters; one black & white and one full colour. Once drawings are received by email we are able to print full size to speed up the manufacturing process.
  • Yes, we have a round duct manufacturing machine with sizes from 100mm up to 1500mm diameter.
  • Yes, we can provide MSDS and technical data sheets on request.
  • Yes, we manufacture many products including acoustic silencers and louvers, round ductwork, plinth surrounds/frames, sub-ducts, equipment platforms, galvanized & stainless steel exhaust hoods, drip trays, frames and brackets.
  • We generally don’t fit spigots to ductwork within the factory, due to the potential damage in transport. However if it’s required, we can cut the holes and even fit the spigots if negotiated.
  • No, if installation is required we have a group of cooperative installers who we work closely with.
  • Yes, we have 4 trucks and 4 trailers on the road full time delivering in NSW and Canberra and we use subcontractors when extra capacity is required.
  • Yes, we are able to pre-insulate your ductwork internally or externally within the factory using state of the art machinery which we can guarantee a quality product regardless of the insulation material type.
  • No problem, we have 21 certified lifting cages of various sizes. Some small enough to go directly into the Ally Mak and some large enough for the biggest crane platform.
  • All of our ductwork is colour coded and has clearly marked transparent labels. All deliveries include a scanned full colour AO print of the workshop drawings highlighting the duct being delivered for easy identification/location.
  • This depends on the amount of ductwork required, generally speaking a complete floor of duct should be ordered a week before its required on site. And generally site measures take 3 days, but if a few site measurements are required urgently they can go through the FAST TRACK system that guarantees that the duct can be picked up in 24 hours
  • No, all duct work is tailor made to the requirements shown on the drawing supplied.
  • Upon request, we can provide foam TDF tape, cup head nuts & bolts, TEK screws, duct sealer, silicon sealer.
  • We supply our ductwork with our standard items of - drive slides cut to length, corner pieces, TDF cleats, hanging strap pre-punched & folded both ends. Plus the following ancillary items applicable for the project – spigots, flexible connections, overflashing, birdwire mesh, single blade dampers.
  • We manufacture on average approx 1,200 square meters/day, with a peak capacity of 8,500 square metres/week.
  • We are able to supply lots of equipment, please visit our E-store for details. Items such as strap master hanging strap tool, galvanized & powder coated site tool boxes, drawing cabinets, storage cabinets, lifting hoists (centre lifter), cleat tools to name a few.
  • We can take on contracts for ductwork supply from $30,000 to $2,500,000, plus with average monthly turn over at $1,200,000 this give us the capacity to run several large projects simultaneously.